Cutting system that can cut a variety of materials.
Such as sample cutting and small lot production is possible.
It is a variety of materials can be cut multi-cutting machine.
The basic function is simple and minimum.Advanced features in systems that add as an option, we realized the low price.Even at low price, standard functionality and work speed are very good.
AS Series Features
1. Adoption of double motor drive system!
By mounting a different blade to two heads, it can be cut in different materials at the same time.The combination of the type and borders also be combined freely.If only one motor is required to perform the recombination of tools. However, if double motor, the labor’s unnecessary.
2. The exact borders and cutting by high-performance timing belt system and strongly hard head.
We’re using is not timing belt system to a conventional cutting machine.It is a high precision, can be a long time used in addition.
The head gained the stable performance with emphasis on the balance of operation and intensity.
3. High quality guaranteed! Long life carbide blade and Japanese parts!
Durability of conventional blade decrease when used in high speed.I prepare a domestic self-developed, abundant blade to support various materials.We can design blade.
4. high strength and high accuracy by the improvement of aluminum honeycomb board!
In conventional plate the swell of the plate needs to be adjusted at regular interval.So thick and heavy plate should be used.Therefore, we have adopted a high-performance aluminum honeycomb board.
It has high durability with respect to the weight.In addition, taking advantage of the structure of the hexagonal column.It is possible to by sucking the material at the blower from the hole, while suppressing the deviation.
5. Options for achieving various purposes
・V-cut (oblique cutting) can be performed automatically, “V-cut tool”
・Function that can be extended range of cutting thickness.
We will respond to your needs in a variety of options.
Please refer to the “option specification List” at the bottom of the page for more information.
The vertical machine for space-saving!
We developed a vertical (stand-type) cutting machine.For the effective use of space.Footprint is about two-thirds of the flat type.If you are planning for the introduction of a space-saving vertical type is recommended.Moreover,the vertical machine is available in Japan.
We offer the various types of work size.Also size other than the following can be developed and manufactured as a special order.
alphabet at the end of the model name represents the type of model. F is flat, S is vertical, W is twin arm･two head.
|Work size||The dimensions of the flat type (mm)||Weight (kg)|
|Work size||The dimensions of the vertical type (mm)||Weight (kg)|
|AS Series Mechanical performance|
|Adaptation material||Cardboard , paper and foam material other all materials|
- DXF processing software “CUT Assist” is provided free of charge to all models
- “Repeat function”, “automatic vacuum ON / OFF function” is standard function for all models
You can see also sample cut page of the list.view sample cut page.learn more
Please use the options in order to optimize a machine to meet your needs.
|40mm thickness cut function||It is possible to cut the material up to 40mm thick|
|60mm thickness cut function||It is possible to cut the material up to 60mm thick|
|100mm thickness cut function||It is possible to cut the material up to 100mm thick|
|V-cut tool for cardboard||It is possible to diagonally cut of up to three layers of cardboard 15mm.|
|Borders tool for plastic cardboard||Can be ruled put in plastic cardboard up to 5mm|
|Standard router head||350w of router head|
|Power router head||1200w of router head|
|Power router head Ⅱ||3500w of router head|
|Pen tool||Up to two can be mounted|
|cropmarks automatic recognition||By recognizing the cropmarks automatically, cutting while correcting a print|
The important thing is after-sales service.
We think “true association starts after product purchase.”
After-sale service is prepared so that the costomer of various countries can also be satisfied.
Software Development and Customization of machines.
In our cutting machine it is equipped with ACS own software CUT Assist as standard.If the data type is DXF, it can be cut using this software.As we recommended other, there is also such as software “rapid cut” that can be cut using a CAD software.
If there is a request to the other, we are also possible the development of software that is tailored to customize and it’s machine.